If your operation cannot go down, you can rely on the Mitsubishi UPS's to deliver dependability when you need it most.
 |
Mitsubishi Uninterruptible Power Supplies: 2033C (10 to 50kVA)
- high efficiency IGBT (converter/inverter), extended battery life
- input power factor of 1.0
- low input current harmonics: 4% THD (100% load), 7% THD (50% load)
- UL924 approved
- zero energy MBS
- batteries included for reduced foot print in 10kVA, 15kVA, 20kVA and 30kVA units
- monitoring, management and shutdown software: optional DiamondLink software or NETCOM Web/SNMP adapter
|
 |
Mitsubishi Uninterruptible Power Supplies: 2033A (30 to 75kVA)
- high efficiency Intelligent Power Module transistors (converter/inverter)
- extended battery life: step loads (0-100%) without the use of batteries
- input power factor of 1.0
- low input current harmonics: 3% THD (100% load),6% THD (50% load)
- zero energy MBS
- operator-friendly control panel
- monitoring, management and shutdown software with paging and e-mail capability: optional DiamondLink software or NETCOM Web/SNMP adapter
|
 |
Mitsubishi Uninterruptible Power Supplies: 2033D (30 to 80kVA): 480in/208 out or 480 out
- IGBT technology (converter/inverter)
- extended battery life: step loads (0-100%) without the use of batteries
- input power factor of 1.0
- low input current harmonics: 4% THD (100% load),7% THD (50% load)
- zero energy MBS
- operator-friendly control panel
- monitoring, management and shutdown software with paging and e-mail capability: optional DiamondLink software or NETCOM Web/SNMP adapter
|
 |
Mitsubishi Uninterruptible Power Supplies: 9700 (100 to 225kVA)
- high efficiency IGBT (converter/inverter), extended battery life
- input power factor of 0.99
- low input current harmonics: 3% THD (100% load), 5% THD (50% load)
- designed for isolated redundant applications
- monitoring, management and shutdown software with paging and e-mail capability: optional DiamondLink software or NETCOM Web/SNMP adapter
|
 |
Mitsubishi Uninterruptible Power Supplies: 9800 (100 to 750kVA)
- high efficiency IGBT for the inverter
- input power factor of 0.90
- low input current harmonics: 6% THD (100% load), 9% THD (50% load)
- designed for isolated redundant applications and Diamond Sync configurations
- Multi-Module Systems (MMS) with independent parallel control and bypass circuits
- monitoring, management and shutdown software with paging and e-mail capability: optional DiamondLink software or NETCOM Web/SNMP adapter
|
 |
Mitsubishi Communication Software
- DiamondLink software is a web based advanced user-customizable power monitoring, management and shutdown software, designed to provide information about the power conditions of the UPS. DiamondLink will monitor the health and status of your Uninterruptible Power Supplies (UPS) and, when critical events occur, will perform a graceful, unattended shutdown.
- DiamondLink software with 25 shutdown licenses: $125.00 each + $20.00 S&H
- place your order over the phone #480-563 4172 (Visa, MC, Amex)
- NetCom is a SNMP/Web agent hardware adapter runs an embedded Simple Network Management Protocol (SNMP)software agent. This agent responds to SNMP GETs and SETs and, also, forwards TRAPs to designated recipients when critical conditions occur to the UPS—such as going on battery backup.
Design Features:
- SNMP Traps
- Local and Remote Shutdown
- Data and Event logging and graphing
- Network Broadcasting
- Real-time Monitoring
- Multi-user Support
- Email and Alphanumeric paging
- NETCOM Web/SNMP adapter with 24 shutdown licenses: $575.00 each + $25.00 S&H
- place your order over the phone #480-563 4172 (Visa, MC, Amex)
|
| Additional Services |
- Preventive Maintenance programs and contracts
- Extended Warranty
|
 |
New batteries for Mitsubishi UPS's: Typically batteries need to be replaced after 3 to 5 years of operation
|