Xantrex inverters for grid-tie and off grid solar systems

Keyitec provides complete power/solar systems with pure sine wave Xantrex inverter/chargers (single phase or 3-phase), battery banks (deep cycle batteries (Rolls, Surrette, Deka (Gel or AGM), Trojan, HuP Solar-One, IBE POWR-Plus, GNB Absolyte IIP) combined with solar panels (Kyocera, Evergreen, Mitsubishi, SolarFun, SolarWorld) and/or utility grid and/or gensets. Give us a call at 480-563-4172 to discuss your application or e-mail us at: info@keyitec.com

1.-Xantrex inverters:Off-grid applications

The Xantrex SW Inverter/Charger is the most popular off-grid power solution. Available in 24- and 48-volt models, it provides utility-grade output power and offers high surge capacity to run most household appliances or office equipment in a small commercial building.
The SW offers many programmable features including automatic generator start and stop as well as automatic load sensing. Its built-in, fully automatic, three-stage battery charger is designed to bring maximum charge to batteries, while using minimum generator run time and fuel.

Features

Available in 4000watts (SW4024, SW4048) and 5500 watts (SW5548)
Utility grade, sine wave power
Three-stage battery charging (bulk, absorption, and float) and battery equalization with remote temperature sensor for increased performance
Programmable control module with LCD display and LED indicators
Soft start capability for starting heavy loads
Built in starting control circuits for two- and three-wire generator starting systems
Expandable and Flexible
Parallel stacking capability for more power at 120V. (optional equipment is required)
Power Module for 120V/240V. configuration (SWxxxx/D)
Xantrex SW inverter/charger specification

2.-Xantrex inverters:Grid Tie applications

	The GT Grid Tie Solar Inverters are available in 2.8kW, 3.3kW, 4kW and 5kW, 208/240V.AC, 600VDC maximum array volts. These high performance PV string inverters offer high efficiency, lower installed cost, improved aesthetics and high reliability. With a NEMA3R enclosure, they can be mounted outside on the wall closed to your utility service entrance panel. Xantrex GT inverter specification
	Purchase Xantrex GT2.8 - $2,375.00 - Xantrex GT3.3 or GT4.0 or GT5.0 - Call #480-563 4172
Using the Xantrex Grid Tie Interface (GTI), the SW inverter converts energy from multiple renewable energy sources, such as solar, wind, and microhydro, into AC power, selling power you do not use back to the utility. Combined with emergency backup generator and solar panels, it provides continuous power. This system is an effective way to reduce your dependence on utility power, lower your electric bills, increase green energy production and improve the environment.
	Xantrex GTI interface - Call #480-563 4172

3.-Xantrex Power Panels:

Xantrex power panels are complete, pre-
assembled electrical systems, ready for installation.
They include the SW Plus inverter(s), the DC breakers
and the bypass. All components are mounted on a
plate easy to install on a wall.

4.-Xantrex GT inverters:Commercial applications

GT 3-Phase Inverters are high voltage, commercial scale utility interactive, 3-phase inverters, with models ranging from 30kW to 250kW. The 100kW and 250kW units are pad-mounted epoxy-coated steel enclosures with integrated transformers and disconnects

The GT inverters are to be used for large scale grid-tie photovoltaic systems

Request for Quotation - Xantrex inverters

Keyitec	Tel.: 480-563 4172
7856 East Camino Vivaz Rd	Fax: 480-563 4997
Scottsdale, AZ 85255	e-mail:info@keyitec.com

Name:
Company:
Work Phone:
Fax:
E-mail: