Outback inverters for grid-tie and off grid applications

Keyitec provides complete power systems with pure sine wave Outback inverter/chargers (single phase or 3-phase), battery banks (deep cycle batteries (Rolls, Surrette, Deka (Gel or AGM), Trojan, HuP Solar-One, IBE POWR-Plus, GNB Absolyte IIP) combined with solar panels (Kyocera, Evergreen, Mitsubishi, SolarFun, SolarWorld) and/or utility grid and/or gensets. Purchase all below components online or give us a call at 480-563-4172 to discuss your application and place your order.

1.- Outback Inverters for grid-tie applications:

Utility interactive allowing you to sell power back to the grid and keep your lights and other loads on when the power goes out.
Brochure: Outback GTFX inverters for grid tie applications

Part Number	Item Description	E-Store Price	Buy Now!
GTFX2524	Sealed Sinewave Inv/Chgr - 2500W 24VDC 120VAC 60Hz 55A (Turbo included)	Free Shipping $1,995.00
GTFX3048	Sealed Sinewave Inv/Chgr - 3000W 48VDC 120VAC 60HZ 35A (Turbo included)	Free Shipping $1,995.00
GVFX3524	Vented Sinewave Inv/Chgr - 3500W 24VDC 120VAC 60HZ 85A	Free Shipping $2,345.00
GVFX3648	Vented Sinewave Inv/Chgr - 3600W 48VDC 120VAC 60HZ 45A	Free Shipping $2,345.00

[Back to Top]

2.- Outback Inverters for off-grid applications:

Extremely rugged, the Outback inverters deliver clean, smooth power to your home or your office. Up to ten inverters can be stacked up to provide 36000watts of power.
Brochure: Outback FX and VFX inverters

Part Number	Item Description	E-Store Price	Buy Now!
FX2012T	Sealed Sinewave Inv/Chgr - 2000W 12VDC 120VAC 60HZ 80A (turbo included)	Free Shipping $1,995.00
FX2524T	Sealed Sinewave Inv/Chgr - 2000W 24VDC 120VAC 60Hz 55A (turbo included)	Free Shipping $1,995.00
FX3048T	Sealed Sinewave Inv/Chgr - 3000W 48VDC 120VAC 60HZ 35A (turbo included)	Free Shipping $1,995.00
VFX2812	Vented Sinewave Inv/Chgr - 2800W 12VDC 120VAC 60HZ 125A	Free Shipping $2,345.00
VFX3524	Vented Sinewave Inv/Chgr - 3500W 24VDC 120VAC 60HZ 85A	Free Shipping $2,345.00
VFX3648	Vented Sinewave Inv/Chgr - 3600W 48VDC 120VAC 60HZ 45A	Free Shipping $2,345.00

[Back to Top]

3.- Outback Inverter Accessories

Part Number	Item Description	E-Store Price	Buy Now!
RTS	Remote Temperature Sensor for FX, VFX or MX60 products	$ 29
FX-DCC	DC Cover – encloses the DC terminal section	$ 65
FX-DCA	DC Conduit Adapter for connection of 2” DC conduit or enclosure to a FX or VFX inverters	$ 45
FX-ACA	AC Adapter extends the AC wiring compartment–required for connection to PSAC or PS2AC enclosure	$ 35
FXA	FX adapters and cover (DCC+DCA+ACA)	$ 129

[Back to Top]

4.- Outback MX MPPT Charge Controller

The Outback MX60 Maximum Power Point Tracking (MPPT) charge Controller enables your PV system to achieve its highest performance. Rated for up to 60A of DC output current, the MX60 can be used with battery systems from 12 to 60VDC with PV open circuit voltage as high as 140VDC. It can be used with any battery type.
Brochure: Outback MX60 Charge Controller
Picture: Outback MX60 Charge Controller

Part Number	Item Description	E-Store Price	Buy Now!
MX60	MPPT Charge Controller – 60 amp 12, 24, 48 VDC battery 140 VOC max PV array (cold)	Free Shipping $649.00

[Back to Top]

5.- Remotes & Communication Managers:

The Outback MATE system controller and display allows monitoring of up to eight MX60 controllers from a location up to 1000feet away. It includes an opto-isolated RS232 port for connection to a PC for data logging and system monitoring.
The HUB4 is a communication manager with ports for up to 4 connections to FX, VFX plus one MATE
The HUB10 is a communication manager with up to 10 connections to FX, VFX plus one MATE.

Part Number	Item Description	E-Store Price	Buy Now!
MATE	System Controller for Off Grid, Backup, & Grid-Tie systems	$295.00
HUB4	Four Port Communication Manager – works up to four with FX, VFX & MX and one MATE	$195.00
HUB10	Ten Port Communication Manager – works up to ten with FX, VFX and MX and one MATE	$375.00

[Back to Top]

6.- Outback FLEXware Complete Power Systems :

For convenience, Outback FLEXware Power Systems are pre-assembled, all components mounted to a back plate and wired. They include inverter(s), AC enclosure inverter bypass, DC enclosure, inverter disconnect breaker and shunt. Charge controllers, battery cables and displays are not included. They are NEC-compliant and ETL listed to UL standards.
For applications with medium power requirements such as homes, light commercial or back-up power systems.

6.1.- FLEXware 500 Power Systems

The FLEXware 500 accommodates all of the essential protective devices in two easy-to-install enclosures. The FW500-AC and FX500-DC are both designed to allow mounting in either a horizontal or vertical orientation to allow easier installation in space limited locations. The FW500 system uses a single FLEXware MP mounting plate.
As with all of the FLEXware systems – order the necessary DC and AC breakers, AC input-output-bypass kits and all other additional components separately.

FLEXware500 supports up to two FX series inverters/chargers and up to two MX charge controllers (2kW to 7.2kW)

For single or dual FX Inverter/Charger systems
Accommodates one or two MX60 Charge Controllers and disconnects
Designed for wall-mounting using the FLEXware MP mounting plate
Very compact design with room for expansion
Separate AC and DC enclosure models
Optimized knock-out locations
500 amp shunt assembly included – space for two additional DC shunts included
Ground bus bar included standard
Powder-coated aluminum with stainless steel hardware

Model	FLEXware	Inverter(s)/qty	AC ouput	DC Voltage	Battery charger	Comments
OBFW5-FX2012T/S	500	1 x FX2012T	2.0kW 120VAC	12VDC	80A	FLEXware 500 systems come with: one RTS one HUB4 IOB-D-120VAC (1x inverter) or IOB-D-120/240VAC (2x inverters) Two-inverter systems also come with a X-240 auto-transformer FLEXware Guide [Request a quote]
OBFW5-FX2012T/D	500	2 x FX2012T	4.0kW 120/240VAC	12VDC	160A
OBFW5-VFX2812/S	500	1 x VFX2812	2.8kW 120VAC	12VDC	125A
OBFW5-VFX2812/D	500	2 x VFX2812	5.6kW 120/240VAC	12VDC	250A
OBFW5-FX2524T/S	500	1 x FX2524T	2.5kW 120VAC	24VDC	55A
OBFW5-FX2524T/D	500	2 x FX2524T	5.0kW 120/240VAC	24VDC	110A
OBFW5-VFX3524/S	500	1 x VFX3524	3.5kW 120VAC	24VDC	85A
OBFW5-VFX3524/D	500	2 x VFX3524	7.0kW 120/240VAC	24VDC	160A
OBFW5-FX3048T/S	500	1 x FX3048T	3.0kW 120VAC	48VDC	35A
OBFW5-FX3048T/D	500	2 x FX3048T	6.0kW 120/240VAC	48VDC	70A
OBFW5-VFX3648/S	500	1 x VFX3648	3.6kW 120VAC	48VDC	45A
OBFW5-VFX3648/D	500	2 x VFX3648	7.2kW 120/240VAC	48VDC	90A

[Back to Top]

6.2.- FLEXware 1000 Power Systems

The FLEXware 1000 accommodates all of the essential protective devices in two easy-to-install enclosures. The FW1000-AC and FX1000-DC are both designed to allow mounting in either a horizontal or vertical orientation. The FW1000 system uses two FLEXware MP mounting plates.
As with all of the FLEXware systems – order the necessary DC and AC breakers, AC input-output-bypass kits and all other additional components separately.

FLEXware1000 supports up to four FX series inverters/chargers and up to four MX charge controllers (5kW to 14.4kW)

For two or four FX Inverter/Charger systems
Accommodates two or four MX60 Charge Controllers and disconnects
Designed for wall-mounting using the FLEXware MP mounting plates
Very compact design with room for expansion
Separate AC and DC enclosure models
Optimized knock-out locations
500 amp shunt assembly included – space for three additional DC shunts included
Ground bus bar included standard
Powder-coated aluminum with stainless steel hardware

Model	FLEXware	Inverter(s)/qty	AC ouput	DC Voltage	Battery charger	Comments
OBFW10-FX2524T/D	1000	2 x FX2524T	5.0kW 120/240VAC	24VDC	55A	FLEXware 1000 systems come with: one RTS one HUB10 IOB-Q-120/240VAC X-240 auto-transformer FLEXware Guide [Request a quote]
OBFW10-FX2524T/Q	1000	4 x FX2524T	10.0kW 120/240VAC	24VDC	110A
OBFW10-VFX3524/D	1000	2 x VFX3524	7.0kW 120/240VAC	24VDC	85A
OBFW10-VFX3524/Q	1000	4 x VFX3524	14.0kW 120/240VAC	24VDC	170A
OBFW10-FX3048T/D	1000	2 x FX3048T	6kW 120/240VAC	48VDC	70A
OBFW10-FX3048T/Q	1000	4 x FX3048T	12.0kW 120/240VAC	48VDC	140A
OBFW10-VFX3648/D	1000	2 x VFX3648	7.2kW 120/240VAC	48VDC	90A
OBFW10-VFX3648/Q	1000	4 x VFX3648	14.4kW 120/240VAC	48VDC	180A

6.3.- Grid-tie Outback indoor power systems

Outback also offers pre-wired and tested one-and two-inverter grid-tie systems for indoor installation.

Choose a 24- or 48-volt system and sealed or ventilated inverters. Add MX60 charge controller(s) and batteries.

Model	FLEXware	Inverter(s)/qty	AC ouput	DC Voltage	Battery charger	Comments
OBFW5-GTFX2524/S	500	1 x GTFX2524	2.5kW 120VAC	24VDC	55A	Grid-tie Outback Power Systems come with: one RTS one HUB4 IOB-D-120/240VAC FLEXware Guide [Request a quote]
OBFW5-GTFX2524/D	500	2 x GTFX2524	5.0kW 120/240VAC	24VDC	110A
OBFW5-GTFX3048/S	500	1 x GTFX3048	3.0kW 120VAC	48VDC	35A
OBFW5-GTFX3048/D	500	2 x GTFX3048	6.0kW 120/240VAC	48VDC	70A
OBFW5-GVFX3524/S	500	1 x VFX3524	3.5kW 120VAC	24VDC	85A
OBFW5-GVFX3524/D	500	2 x VFX3524	7kW 120/240VAC	24VDC	170A
OBFW5-GVFX3648/S	500	1 x VFX3648	3.6kW 120VAC	48VDC	45A
OBFW5-GVFX3648/D	500	2 x VFX3648	7.2kW 120/240VAC	48VDC	90A

[Back to Top]

Request for Quotation - Outback inverters

Keyitec	Tel.: 480-563 4172
7856 East Camino Vivaz Rd	Fax: 480-563 4997
Scottsdale, AZ 85255	e-mail:info@keyitec.com